This how-to video explains the steps in order to unlock your Ford Fusion if the car battery or the key fob battery are dead. We also show how to start the vehicle in the case that the key fob battery is dead.
Have any other questions? Leave them in the comments section below!
Call us at (734)-721-2600 or check us out online at jdemmerford.com
How to unlock and start Ford Fusion with dead key fob battery!
While even the baseline factory halogen headlights on the 2015 to 2017 F150s are pretty stylish, they don’t really cut it when it comes to either their light output or their overall look if you have a more aggressive styling theme in mind for your truck. ANZO’s 2015 to 2017 F150 LED Outline Projector Headlights are some of the most awesome and aggressive aftermarket headlights you can grab for your truck. Designed specifically for 2015-2017 F150s with base halogen reflector headlights, ANZO’s headlights feature a dual projector lens design for both the high beams and the low beams set in a black housing that completely changes the looks and character of your hyper-tough F150 build. ANZO’s headlights even have an OE-style LED outline strip that functions as both a white running light and amber turn signals to make your F150 really turn a few heads.
Most aftermarket headlights for the 2004 to 2016 F150s use H7 halogen bulbs for their projector low beams that aren’t all that impressive. This Oracle H7 LED conversion kit F150s with aftermarket headlights greatly improve the light output of your projector headlights, all with a fairly simple, plug-and-play install. These powerful, drop-in replacement LED headlight bulbs produce an excellent amount of light to improve your forward light output without being intense enough to blind other drivers. Oracle’s F150 LED headlight bulbs drop right into place of the standard H7 halogen bulbs in your aftermarket projector headlights and come with everything you need to get them running on your truck.
Do 22×14 -76 wheels with 35″x12.5″ tires fit on a 2011 Ford F-150 4WD Rough Country Suspension Lift 6″?
Yes it does! This 2011 Ford F-150 4WD is running Fuel Octane 22×14 -76 wheels Toyo Open Country MT 35″x12.5″ tires with Rough Country Suspension Lift 6″ suspension, needs Major Plastic Trimming and has Slight rub at full turn. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Super Aggressive 3″-5″. Also remember spacers impact fitment, this ride is running None in front and None in rear.
Easy DIY guide: Renew the main upper engine mounts for a Ford Duratec. Featured is a Mondeo Mk3; the parts and process are similar for all Duratec installs such as in a Focus, same for Mazda MZRs, and indeed most engine mounts in any car.
The RH (engine) side mount on the Duratec featured is a hydraulic dampening mount, which fail when the rubber perishes and cracks or is damaged allowing the fluid the drain out. In this case my vibration problem was a product of this mount failing (lifetime approx. 12 years and 120,000 km).
Required:
* 10 mm socket with 1/4″ or 3/8″ ratchet handle (coolant expansion tank)
* 1/2″ breaker bar, decent length extension bar, and deep socket sizes 15 mm, 18 mm, and 21 mm
* 1/2″ Torque wrench (ideally). Nb. I torque the bolts by estimating force applied to a known breaker bar length.
* New engine mounts to suit engine and fitting. You would ideally replace in pairs even though only one typically fails at a time.
Nb. the examples featured may be of identical design geometry for your case, but can vary (particularly the LH side) in rubber compound for engine weight/power. Ford use a color label to identify rubber compounds (you can see the LH mount is marked brown), while the alloy castings of the mount bodies themselves do not differ – so take care to ensure your replacement mount matches the old one.
* Flat bladed screwdriver to remove air intake hose clamp, and long nose pliers to redo.
Generally:
* Medium strength threadlocker (e.g. Loctite 243 [blue]). Amazon US: http://amzn.to/2DN3Upv | UK: http://amzn.to/2mTuVAv
* Marker pen
* Maybe: hot air gun & penetrating oil
* Optional: anti-seize (*not* for use on engine mount bolt/nut threads). Amazon US: http://amzn.to/2rlBU9Z | UK: http://amzn.to/2Beksni
* Scissor jack and block of wood, or other reliable engine lifting method
* Jack and axle stands, or other suitable and safe way to lift car.
Using the above Amazon links helps support my channel and is appreciated!
How to: Replace Ford engine mounts (Duratec, Mondeo)
Michael Clark and Brian Park put the pedal to the metal, and the metal to the ice, with the 2015 Ford Mustang EcoBoost, wearing Nokian Hakkapelliita 8 studded winter tires.
